Skip Navigation

European Heart Journal 1990 11(Supplement I):6-12; doi:10.1093/eurheartj/11.suppl_I.6
Copyright © 1990 by the European Society of Cardiology.
This Article
Right arrow Full Text (PDF)
Right arrow E-letters: Submit a response
Right arrow Alert me when this article is cited
Right arrow Alert me when E-letters are posted
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Add to My Personal Archive
Right arrow Download to citation manager
Right arrowRequest Permissions
Right arrow Disclaimer
Google Scholar
Right arrow Articles by Lund-Johansen, P.
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Lund-Johansen, P.
Social Bookmarking
 Add to CiteULike   Add to Connotea   Add to Del.icio.us  
What's this?

© 1990 The European Society of Cardiology

The dye dilution method for measurement of cardiac output

P. Lund-Johansen

Section of Cardiology, Medical Department, University of Bergen, School of Medicine Bergen, Norway

Address for correspondence and reprint requests: Prof. P. Lund-Johansen, Medical Department, N-5021 Haukeland Haspital, Bergen, Norway

The dye dilution method for measuring cardiac output is based on injecting rapidly a known quantity of a dye at one site into the circulatory system, and withdrawing blood at a distal site for determination of a concentration curve of the dye.

Flow (Q) is calculated by the formula:

where m is the amount of dye injected, mean concentration of dye and t the time of the concentration curve without recirculation.

In recent years the only dye used has been indocyanine green (cardiogreen) which has its absorption maximum in the infrared part of the spectrum (at 805 µm) – where oxyhaemoglobin and reduced haemoglobin transmit light equally.

Several densitometers for cardiogreen have been developed. The Christian Michelsen Institute densitometer used in our laboratory was found to give very accurate measurements (error < ± 2%) of blood flow in model experiments, for flows ranging from 2 to 12 lmin–1. The more modern densitometers are usually equipped with computers.

The cardiogreen method is probably one of the most accurate methods to study cardiac output during exercise. The error of a single determination of cardiac output values at rest and during exercise is less than ±5%. The method does not allow measurement of ‘beat to beat’ changes, and requires a cardiac output which is stable for approximately 10 s during exercise and 30 s at rest. It has been extensively used in our laboratory to study changes in central haemodynamics in essential hypertension at rest and during exercise, and also to study the haemodynamic alterations induced by anti-hypertensive agents.

The method is safe and may be used on an outpatient basis. Another advantage is that the arterial catheter can be used for determination of blood pressure during exercise, when all methods based on arm cuff sometimes give very inaccurate values, particularly for diastolic blood pressure.

Key Words: Haemodynamics • dye dilution • cardiogreen • densitometers


Add to CiteULike CiteULike   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us    What's this?




Disclaimer: Please note that abstracts for content published before 1996 were created through digital scanning and may therefore not exactly replicate the text of the original print issues. All efforts have been made to ensure accuracy, but the Publisher will not be held responsible for any remaining inaccuracies. If you require any further clarification, please contact our Customer Services Department.